Zum Inhalt springen

Tauchcomputer-Kompatibilität von BlendIQ – GasBlender

Welche Tauchcomputer BlendIQ liest und was hilft, wenn das Einlesen nicht klappt.

Deutsch

Stand: 6. November 2026

Kurzfassung: BlendIQ liest Tauchgänge für die Auswertung, direkt per Bluetooth LE von Shearwater, Halcyon Symbios und heinrichs weikamp OSTC oder als Datei (UDDF). BlendIQ liest nur; Einstellungen am Tauchcomputer ändert die App nie. Eine Angabe auf dieser Seite ist eine Nachweisaussage, keine Zusage für jedes Gerät und jede Firmware.

1. Drei Nachweisstufen

  • Am Gerät geprüft – ein reales Gerät mit genannter Firmware wurde mit BlendIQ verbunden und hat Tauchgänge vollständig geliefert.
  • Nach Beschreibung – das Modell nutzt laut öffentlicher Protokollbeschreibung denselben Weg wie ein geprüftes Gerät, und unsere automatisierten Tests sind grün. Ein reales Gerät dieses Modells wurde noch nicht verbunden.
  • Nach Herstellerangaben, nicht am Gerät geprüft – der Hersteller nennt das Modell als Teil derselben Gerätefamilie mit denselben Lesebefehlen. Ein reales Gerät dieses Modells wurde noch nicht verbunden; unsere automatisierten Tests decken nur die Herstellerbeschreibung ab, nicht das Gerät.

2. Direkt per Bluetooth LE

ModellNachweisHinweis
Shearwater Petrel 3Am Gerät geprüft (11. Oktober 2026, Firmware 103)Verbindet sich nur für das Einlesen; vorher Bluetooth im Menü des Tauchcomputers starten.
Shearwater Perdix AIAm Gerät geprüft (24. Oktober 2026, Firmware 102)Ein erster Fehlschlag lag am Bluetooth des iPhone; nach einem Neustart des iPhone klappte es.
Halcyon Symbios HandsetAm Gerät geprüft (Firmware 2.36.11 und 2.36.12)Erstes Koppeln mit Code. Nur eine App kann gleichzeitig verbunden sein; „Trennen“ gibt ihn für die Halcyon-App frei.
Halcyon Symbios HUDNach Beschreibung–
Shearwater Perdix, Perdix 2, Perdix 3, Petrel 2, NERD 2, Teric, Peregrine, Peregrine TX, Tern, Tern TXNach BeschreibungGleicher Weg wie Petrel 3; Perdix 3 mit größerer Paketgröße.
heinrichs weikamp OSTC PlusAm Gerät geprüft (6. November 2026, Firmware 3.38; Mac, iPad und iPhone)Nur lesend, OC- und CCR-Tauchgänge. Vorher Bluetooth am OSTC einschalten; nach dem Einlesen verlässt der OSTC den Bluetooth-Modus von selbst.
heinrichs weikamp OSTC, weitere Modelle mit Bluetooth LENach Herstellerangaben, nicht am Gerät geprüftLaut Hersteller dieselben Lesebefehle wie beim OSTC Plus. Kein weiteres Modell wurde bisher verbunden; die zweite Bluetooth-Variante dieser Geräte (Terminal IO) ist umgesetzt, aber an keinem Gerät geprüft.

Nicht direkt lesbar: Shearwater Predator, Petrel (erste Generation) und Nerd (erste Generation) haben kein Bluetooth LE. Andere Hersteller liest BlendIQ über eine Datei (Abschnitt 3).

3. Über eine Datei

  • UDDF – zum Beispiel ein Export aus der Shearwater Cloud oder aus anderen Logbuch-Programmen. In der App: „Auswertung“ › „Einlesen“ › „UDDF-Datei öffnen …“.
  • Garmin FIT – Tauchgänge einer Garmin Descent, im selben Dialog wie UDDF. Kommt mit BlendIQ 2.0.2.

4. Wenn das Einlesen nicht klappt

  1. Bluetooth am Tauchcomputer starten. Beim Shearwater im Menü „Bluetooth“ starten, beim Symbios Bluetooth einschalten, beim OSTC Bluetooth im Menü einschalten.
  2. Keine zweite App verbunden. Shearwater Cloud, die Halcyon-App oder andere Logbuch-Apps vorher schließen bzw. trennen.
  3. Berechtigung prüfen. In den Systemeinstellungen müssen Bluetooth und die Freigabe für BlendIQ aktiv sein.
  4. Bluetooth am Telefon aus- und einschalten oder das Gerät neu starten. Das hat beim Perdix AI geholfen.
  5. Nah dran, geladen, eingeschaltet. Tauchcomputer und Telefon nebeneinander legen.
  6. In BlendIQ: beim Symbios „Trennen“ und dann „Verbinden“, beim Shearwater Bluetooth am Tauchcomputer neu starten und „Verbindung testen“ wählen, beim OSTC Bluetooth am Gerät wieder einschalten und neu einlesen.

Die Hilfe in der App (Kapitel zu Geräten) beschreibt jeden Schritt und gilt auch ohne Netz.

5. Einen Tauchcomputer melden

Funktioniert ein Gerät – oder nicht –, freuen wir uns über eine Meldung mit Modell, Firmware, App-Version, Gerät (Mac, iPad oder iPhone) und dem Ergebnis: über das Meldeformular oder per E-Mail an office@feichtiq.com. Bitte keine Seriennummern, Namen oder Tauchgangsdaten eintragen; das Formular ist öffentlich. Gemeldete Geräte führen wir getrennt als „vom Anwender bestätigt“.

BlendIQ – GasBlender dive computer compatibility

Effective: November 6, 2026

Summary: BlendIQ reads dives for the analysis, directly over Bluetooth LE from Shearwater, Halcyon Symbios and heinrichs weikamp OSTC or from a file (UDDF). BlendIQ only reads; the app never changes settings on the dive computer. An entry on this page is a statement of evidence, not a promise for every device and every firmware.

1. Three evidence levels

  • Checked on the device – a real device with the named firmware was connected to BlendIQ and delivered dives completely.
  • By description – according to the public protocol description, the model uses the same path as a checked device, and our automated tests are green. No real device of this model has been connected yet.
  • By the manufacturer’s description, not checked on the device – the manufacturer names the model as part of the same device family with the same read commands. No real device of this model has been connected yet; our automated tests cover only the manufacturer’s description, not the device.

2. Directly over Bluetooth LE

ModelEvidenceNote
Shearwater Petrel 3Checked on the device (October 11, 2026, firmware 103)Connects only for reading; start Bluetooth from the dive computer’s menu first.
Shearwater Perdix AIChecked on the device (October 24, 2026, firmware 102)A first failure was caused by the iPhone’s Bluetooth; after restarting the iPhone it worked.
Halcyon Symbios handsetChecked on the device (firmware 2.36.11 and 2.36.12)First pairing with a code. Only one app can be connected at a time; “Disconnect” frees it for the Halcyon app.
Halcyon Symbios HUDBy description–
Shearwater Perdix, Perdix 2, Perdix 3, Petrel 2, NERD 2, Teric, Peregrine, Peregrine TX, Tern, Tern TXBy descriptionSame path as Petrel 3; Perdix 3 with a larger packet size.
heinrichs weikamp OSTC PlusChecked on the device (November 6, 2026, firmware 3.38; Mac, iPad and iPhone)Read-only, OC and CCR dives. Switch Bluetooth on the OSTC on first; after reading, the OSTC leaves its Bluetooth mode by itself.
heinrichs weikamp OSTC, other models with Bluetooth LEBy the manufacturer’s description, not checked on the deviceAccording to the manufacturer the same read commands as the OSTC Plus. No other model has been connected yet; the second Bluetooth variant of these devices (Terminal IO) is implemented but not checked on any device.

Not readable directly: Shearwater Predator, Petrel (first generation), and Nerd (first generation) have no Bluetooth LE. BlendIQ reads other manufacturers from a file (section 3).

3. From a file

  • UDDF – for example an export from Shearwater Cloud or from other logbook programs. In the app: “Analysis” › “Read” › “Open UDDF file …”.
  • Garmin FIT – dives from a Garmin Descent, in the same dialog as UDDF. Coming with BlendIQ 2.0.2.

4. If reading does not work

  1. Start Bluetooth on the dive computer. On a Shearwater start “Bluetooth” from the menu, on a Symbios turn Bluetooth on, on an OSTC switch Bluetooth on from the menu.
  2. No second app connected. Close or disconnect Shearwater Cloud, the Halcyon app, or other logbook apps first.
  3. Check the permission. In the system settings, Bluetooth and the permission for BlendIQ must be on.
  4. Turn Bluetooth on the phone off and on, or restart the device. This helped with the Perdix AI.
  5. Close by, charged, switched on. Put the dive computer and the phone next to each other.
  6. In BlendIQ: for a Symbios choose “Disconnect” and then “Connect”; for a Shearwater restart Bluetooth on the dive computer and choose “Test Connection”; for an OSTC switch Bluetooth on the device on again and read anew.

The help in the app (chapter on devices) describes each step and also works offline.

5. Reporting a dive computer

Whether a device works or not, we welcome a report with model, firmware, app version, device (Mac, iPad, or iPhone), and the result: via the report form or by e-mail to office@feichtiq.com. Please do not include serial numbers, names, or dive data; the form is public. We list reported devices separately as “confirmed by a user”.